Skip to main content

Settings: WiFi Connection

Your hubs connection to your WiFi was setup when you initially installed your Boundary alarm but if you have changed your WiFi password or you wish to use a different WiFi network, you can access the details through the settings menu:

Access the Wifi Menu

  1. Tap the hub screen to wake the system up
  2. Enter your user PIN
  3. Tap the Red Cross to bypass any on-screen messages
  4. Tap Settings > Wifi

The existing connected network will then be displayed along with any other available networks

Changing the WiFi Connection Password

If you have changed your WiFi password you can rejoin the network with the new password by:

  1. Access the WiFi settings as described above
  2. Tap the WiFi network name you want to change
  3. Enter your WiFi password (this is limited to a maximum of 25 characters)
  4. Tap the Green Tick to save your settings

Changing the Wifi network

2.4Ghz Network Required!

You will need to use a 2.4Ghz network to connect to our platform. Other network frequencies are not yet supported.

You can also change the WiFi network you use to connect to our platform at any time:

  1. Access the WiFi settings as described above
  2. Tap the WiFi network name you want to use
  3. Enter your WiFi password (this is limited to a maximum of 25 characters)
  4. Tap the Green Tick to save your settings

Have Connection Problems?

If you are having issues with the WiFi connection for the hub then the articles below may help:

 

 

Related articles